Plumbing Materials Impact the Environment

Environmental performance comes to mind in terms of considering the system which contributes to the high-performance home. And this actually leads builders to focus on building systems that are most commonly associated with environment and energy efficiency. So, for example, they are mostly associated with insulation and HVAC.

Nevertheless, the plumbing system influences various critical components of any home performance, which is very crucial for today’s home buyers. Moreover, these impacts can extend further to cover water quality, not only the environmental performance.

According to the research of Home Innovation Research Labs in 2013, they found three elements essential for homeowners when shopping for a new home.

  1. A healthy place to live
  2. Lower operating costs
  3. A contribution to the sustainable lifestyle

Another research on the homebuyers in 2015 conducted by Lubrizol shows that 49% of homebuyers can consider “minimal environmental impact,” which is very important when it comes to selecting plumbing piping systems.

So, builders should consider how the plumbing system can contribute to a healthy place to live. At the same time, how to satisfying their environmentally friendly customers.

  1. A healthy place to live

Generally, the plumbing system carries drinking water that consumes by families every day. Thus, it is crucial to ensure a healthy home plumbing system. In Michigan, the water crisis is the most important to understand because water contamination issues should not overlook.

Drinking water remains stagnant in our system as we move toward other water-efficient homes. And it can increase the risks of dangerous bacterial growth. For instance, one can suffer from legionella or Coli from water.

Copper and PEX materials have a higher risk of bacterial growth compared to the CPVC materials, according to multiple studies around the world.

However, in human life, plumbing systems can influence other health issues, including the life cycle and human health impacts. “When compared to PEX, CPVC materials demonstrate a 21% lower lifecycle human health, cancer toxicity and a 29% lower human health, non-cancer toxicity.”- according to the US Department of Commerce NIST BEES database.

CPVC outperforms PEX by 7-9% in 8 out of 9 traditional environmental categories, including Ecological Toxicity, Smog, Air Pollution, Fossil Fuel Depletion, and Global Warming Potential – according to another data research result from the BEES data.

  1. Lower operating costs

When considering environmental performance, most homeowners look to their bottom line rather than the plumbing system. Therefore, even environmental engineering has become one of the commonplace in the “payback period.” However, if you want to save some bucks, you can choose FlowGuard Gold Plumbing System material. This material costs a lower one-third of a copper and PEX system.

At the same time, when comparing it to the PEX system, the FlowGuard Gold CPVC system shows results in better operating costs.

CPVC systems demonstrated 5% less energy waste than PEX and 17% less energy waste than copper, according to research on plumbing systems in 2011 by Franklin Associates. Also, the same study shows that compared to the copper system, the CPVC system conserved 10-15% more water than the PEX system.

  1. A contribution to the sustainable lifestyle

Some homebuyers want additional assurance that the product they use will help them to lead a sustainable life since environmental performance is essential. That’s the reason the FlowGuard Gold team ensures environmental transparency, which includes plumbing pipes. And it was the industry’s first environmental-friendly plumbing pipe that demonstrated ecological performance.

Final Words

So, if you are thinking about building a new home or want to purchase a new one, then make sure to check the plumbing system is environmentally friendly. That’s because we consume water every day, which should be contamination free. Moreover, an environmentally-friendly plumbing system reduces the costs as well. Thus, you can also save some bucks.

 

Save Water and Energy By Home Plumbing Systems

Water is essential as air, but we should not waste it. Usually, per day a typical American household uses more than 300 gallons of water – according to the Environmental Protection Agency (EPA). Whereas 30 percent of water usage occurs outdoors and 70 percent is used indoors.

However, we are environmentally very conscious about water conservation in our daily lives; additionally, for the residential plumbing fixtures, the water usage limits by the Energy Policy Act in 1992 Congress. Prior to the act, toilets were required to use 1.6 gallons of water per flush, as an example. But toilets use 3.5 gallons per flush. Since raising the bar for mandating low-consumption fixtures, some states in the USA have adopted new standards. One of the most high-efficient is toilets using 1.28 GPF.

Anyhow, as a water user, there are many ways you can reduce water consumption smartly. At the same time, this will help in saving energy. This guide will discuss a few tips on how you can try this.

Tips for Saving Water and Energy

  1. Inspect Home Plumbing to Find Out Issues

If you can detect the plumbing issues very early, it will be easier for you to fix them.

– Check out the bath, sink or shower hardware for any leakage.

– Inspect below the sink to check pipes.

– Inspect your utility room, as well as pipes in your basement.

– You can check out toilet leaks by adding a few drops of food color to the tank. After 10 to 15 minutes, check out whether the color has changed or not. And inspect the floor as well around the toilet this will show you the broken seal.

– Inspect the outdoor hoses or faucets as well.

If you find any defective pipes or fixtures, then you have to replace or fix the pipes. Once you fix the leaking faucets or pipes, this could save up to 20 gallons of water each day.

  1. Using the low-flow fixtures

You can effortlessly replace existing fixtures without disturbing any plumbing installation if you have low-flow fixtures. This is also a very effective way of water conservation.

– Using low-flow fixtures can reduce water consumption by up to 30 percent more than any conventional fixtures.

This helps use 40 percent less water consumption than any normal faucets.

If your toilet uses more than 5 gallons per flush, replace this with a new one.

The best thing is that a low-flow fixture also helps reduce electricity consumption only if your property uses a water booster pump.

  1. Water Heaters for Energy Consumption

This can achieve significant energy savings if you are using a water heater since it reduces the volume of water flow.

– One of the most energy-efficient models is replacing an old heater with a new one.

– Tankless heaters reduce energy consumption.

If you are using a tank-based heater, ensure to maintain it properly to get adequate performance at optimal levels.

– You can also prevent scalding plus reduce energy expenses when you keep the water heater at 120 degrees Fahrenheit.

– To avoid any heat losses between the plumbing fixtures and water heater make sure to insulate pipes.

  1. Inspect Supply Hoses of Washing Machine

Generally, washing machines use large amounts of water to impact your water bills.

– Check out the floor beneath the washing machine for any leaking signs or drips.

– Inspect the water supply from end to end to check out any damage signs.

– If you are using rubber hoses, then ensure to replace them every five years since these are most likely to damage.

  1. Develop Garden Management Practice

– Most homeowners focus on indoor water usage or energy consumption. You should also focus on outdoor water or energy consumption.

– Use thick pipes around trees to reduce evaporation.

– You can also save rainwater to use to maintain your landscape.

– Bring an intelligent sprinkler controller that helps save 40 gallons of water per day.

  1. Maintain Drain As Well

– You can use an environment-friendly drain to prevent clogging because chemical systems can damage the drain sooner.

– To keep out of drain pipes, you can use strainers.

– Try to keep out oil or fats from drain pipes.

– Maintain the garbage disposal guideline to avoid any damage to the drain pipes.

Thinking About Solar Power

The use of solar power is on the rise, thanks to the recent emphasis on becoming green and moving toward a more sustainable society. The sun’s rays may be harnessed to produce solar power.

Solar panels convert the sun’s rays into electricity (usually installed on your home’s roof). They convert the energy generated by the sun and other sources into electricity for your home.

In Culpeper County, solar energy is an excellent alternative for residential and business buildings. Inquiries regarding solar power, what it comprises, and the physics behind it is frequently asked of us by our customers. Here’s everything you need to know if you want to go solar.

Value vs. Cost

The cost of solar electricity is a major consideration in North American decisions. The cost of installing solar panels and setting up your electricity infrastructure to accept the sun’s energy is substantial, but it’s more of an investment than a price paid.

By breaking links with your current power provider and switching to solar, you can save money over time. See what we’re now allocated for solar tax rebates or credits on the Culpeper County website. This number is subject to vary each year. Somewhere between $5,000 and $6,000 is a safe bet for rebates.

 

How Much Solar Power Do You Need?

“How much solar electricity do I need?” is another common inquiry we get at Culpeper Home Services. The answer varies according to your home’s size and current electricity use. Compared to an electric-heated home, a gas-heated home reduces energy consumption demand.

Between 7,500 and 35,000 kWh is the typical range for most people. Professionals can give you more accurate estimates depending on your home’s size and use.

 

Location

Before purchasing solar panels, make sure you have a space for them. Older homes may need repairs, alterations, or even a complete replacement before they can accommodate solar panels on their roofs.

Some localities allow the installation of solar panels in the backyard. Roof installation may be too expensive or infeasible, but this may be a viable solution if you have enough room. Regardless of where you decide to mount them, make sure you can get the best possible placement for them.

The solar panels in the northern hemisphere should face south to obtain the most direct sunlight throughout the day. The panels should face north in the southern hemisphere, whereas the opposite is true in the north.

 

Permits Maybe Required

The restrictions for putting solar panels on residential homes vary from city to city, county to county, and state to state. If you’re planning on installing anything, you must check your local zoning legislation and city codes beforehand.

The Solar Energy Industries Association has put resources together to help you navigate any bureaucracy that may stand in your way.

Applying for the permissions you need may take some time, both in the submission and approval processes. As with any major investment, patience is required when deciding whether or not to go solar.

 

Consider all Expenses

You will save money in the long term if you persist with solar panels, and your electricity bill will continue to decrease due to the sustainable energy source. However, some costs must be taken into account.

The cost of the panels might be rather high at the beginning. Consider if you can pay for this expenditure in full or whether you will need to take out a loan to make the purchase. Be careful to factor in the interest rate and how much you’ll owe throughout the loan. Solar panels can also be rented.

 

A Smart Meter is a Smart Move

If you opt to go solar, you’ll need a smart meter installed to monitor your energy usage. However, installing a smart meter while debating whether or not to go solar is a wise move.

This is the greatest approach to fully comprehending how you use power. There are 30-minute intervals to see how much electricity you’ve used. If you know when and how you use your electricity, you’ll be able to decide whether or not solar power is right for you.

Even if you’re certain that solar power will work, knowing how you consume electricity can help you choose the ideal arrangement of your solar system – for example, modifying the panel layout to receive more power.

 

Is Solar Energy For You?

Some homes and budgets don’t make sense for solar panels, but the technology is gaining popularity. The installation of solar panels may disclose that your house has issues that need to be addressed, or your property may not be suitable for solar panels in the first place. Alternatively, you may find yourself in a scenario where the expense of solar panels is prohibitive.

Practical Ways to Make Your Plumbing More Energy Efficient 2022

In addition to saving you water, energy-efficient plumbing also saves you money, which is a win-win for everyone. Heating water more effectively, limiting heat loss through plumbing pipes and fixtures, and reducing hot water usage are the three main aims for homeowners who want to conserve energy.

Reducing the amount of water you use reduces the amount of electricity your good pump needs to run, which means you’re saving money on your electric bill.

 

1.     Install a New Low-Flow Toilet

Since the 1990s, toilet water consumption requirements have tightened. If a toilet was acquired before that period, it likely needs at least 3.5 gallons of water to flush out waste, regardless of whether the waste is solid or liquid.

Much less water is used in today’s toilets. In several areas in the United States, a toilet’s GPF (gallons per flush) is limited to 1.28. There are dual flush toilets that may utilize as little as a single gallon of water for the liquid flush option to save more than 2 gallons of water every flush.

 

2.     Install Aerators

One of the drawbacks of early low-flow faucets was that they reduced water flow by lowering water pressure, which was a drawback in and of itself. Because of this, they became hated by the public.

Even those who enjoy them find that using the faucet takes longer. On the other hand, new faucet aerators use less water while maintaining high pressure.

 

3.     Upgrading To An Energy-Efficient Washer/Dryer

You may save a lot of money by simply washing full loads, but you can save even more money by purchasing an Energy Star-certified washing machine.  A high integrated modified energy factor indicates that, depending on the rating, the finest models can consume up to 45 percent less energy than traditional top-load versions.

Their integrated water factor is also low, allowing them to utilize as little as half the water as conventional methods. Each product’s rating may be seen on its label. You may believe that washing your dishes by hand rather than using a dishwasher will save water and electricity, but this is not the case.

Dishwashers consume less water than you would in the sink to clean your dishes. Only run full loads, select energy-saving mode, and dry dishes using the air-dry cycle (which utilizes cold air) to save the most energy.

 

4.     Insulating Pipes

When the temperature drops below freezing, you should not just insulate the pipes that are most at risk of freezing but also all the other hot water pipes in your plumbing system.

Because of the reduced heat loss, it’s more probable that you’ll be able to utilize the hot water right away, rather than having to wait and wastewater. Installing pipe insulation is a simple and cost-effective process.

 

5.     Modernize Your Bathrooms

Your toilets consume a lot of water, just like your faucets. It takes around 3.5 gallons of water to flush an ordinary toilet. In contrast, high-efficiency toilets consume just one and a half gallons of water every flush, saving up to half the usual amount.

Even dual-flush toilets are available for purchase. Using less water to flush liquid waste than solid waste using a dual-flush type is possible. Most dual toilets have a liquid waste capacity of one gallon and a solid waste capacity of one and a half gallons.

 

6.     Water Treatment Products Should Be Eco-Friendly

Water conservation alone isn’t enough to achieve true sustainability. Consider the chemicals and other solutions that are used in your plumbing. Use natural products wherever feasible, as everything that enters your body might potentially come into touch with groundwater.

Grease and other tough food waste should not be flushed down the toilet or the drain. Plumbers advocate environmentally friendly plumbing products when you need to unclog your drains or treat your septic tank. Using enzyme alternatives that are kinder on pipes drains, and septic tanks will save you money in the long run by lowering the need for repairs.

Make your house more eco-friendly with the help of these tips. If you want to save water, do everything you can to benefit yourself and Mother Nature. Reducing water waste will help lower your monthly water cost.

Ensure Plumbing System Sustainability: Quickly Save 40% on Energy and Water

Engineers, analysts, researchers, and policymakers make up the bulk of my clients in the energy and environmental building business. In my view, sustainability in the home as a system begins with reducing energy consumption.

Talking about other aspects of sustainability is pointless if energy efficiency isn’t taken into account. When your house has more air leakage than the next barn, you don’t want to hear about the sustainability of fast renewing flooring vs. old growth wood flooring.

When I was requested to write a piece on “plumbing system sustainability,” I was interested in the subject matter. In addition to their energy consumption, plumbing systems also have considerable water consumption consequences (second only to energy).

Theoretical and Applied

The usage of energy may be measured and substantially impacts long-term sustainability. The EPA calculates that carrying and processing water and providing wastewater facilities account for 3% of our electricity use.

This equates to around 45 million metric tons of CO2 per year, or 56 billion kilowatt-hours (kWh). Water heating accounts for at least 20% of the total energy utilized in a typical home. Since space conditioning has grown more efficient, this proportion has continued to rise.

Utilize Low-Flow Fittings

Low-flow fixtures are specialized devices that may be mounted to various appliances. They assist households in saving money on their utility bills by reducing their water and electricity usage.

Showerheads, faucets, toilets, and aerators may be outfitted with low-flow technology to save water. The best way to learn about low-flow solutions and how to install them is by consulting an experienced and qualified plumber.

Another fantastic item that saves a lot of water each year is the dual flush toilet. Using less water per flush, it’s a high-efficiency toilet. If your toilet is more than a decade old, it’s time to replace it with a new, more efficient model.

Water Heaters Use a Lot of Electricity

Water conservation is a great option if you’re looking to cut down on your utility bills. Old water heaters should be replaced with newer, more energy-efficient versions. Tankless water heaters consume less energy because they only heat the water used.

Keeping a tank-based water heater clean is important to retain its performance and efficiency at its peak. You can prevent scorching while saving money on your utility bill by keeping your water heater at 120°F or lower.

The water heater and plumbing fittings should be well-insulated to prevent heat loss from leaking into the air between them.

Create Effective Lawn and Garden Care Methods

Many property owners are concerned about conserving water indoors but neglect to do so when used outside. This may be a significant component of the water cost in properties with vast green space.

Reduce evaporation and water usage by applying a 1- to 3-inch layer of mulch around trees and other plants and using rainwater collected in barrels or other containers to maintain the landscape. To conserve water, you should use a smart sprinkler controller. The best time to water your grass is in the early morning to prevent evaporation loss.

Use xeriscaping, a landscape and gardening design method that reduces watering requirements. Effective irrigation and the utilization of desert plants are just a few of the xeriscaping options at your disposal.

Don’t Overlook Drains

Although drains do not directly impact water or energy usage, their role in plumbing is critical to the overall efficiency of the plumbing system. A plumbing system that conserves water and uses less energy is fantastic, but it must also be properly drained. Once a drain becomes clogged, it’s too late to do anything.

Clean your drains using ecologically friendly products instead than chemically injected ones, which can corrode pipes. Drain pipes might become clogged if you don’t utilize a filter in the bathroom. Garbage pipes become clogged as grease cools and hardens on the walls of the pipes.

When the grease has cooled, please place it in a heat-resistant container and dispose of it in the trash. Drain pipes can be damaged if rubbish is not properly disposed of. Dental floss should not be flushed down the toilet because it clumps with other trash and clogs the pipes.

Maintaining Your Plumbing

When it comes to plumbing, heating and air conditioning aren’t the only things you need to watch. Your plumbing system at home should also be given the attention it deserves and properly cared for.

Maintaining numerous appliances and fixtures requires regular upkeep. If you want to keep your plumbing system in peak condition, you should engage a plumbing service in Edmonton to do regular inspections and repairs regularly.